| Motor Specifications | |
| Voltage | 120 |
| Amps | 3.8 |
| Hertz | 60 Hz |
| Phase | Single |
| RPM | 3450 RPM |
| Motor Type | Permanent Split Capacitor (PSC) |
| Insulation | Class A |
| Circuit Requirements | 15 amp (min) individual circuit |
| Duty Rating | Continuous* |
| Shaft Seal | Carbon/ceramic and stainless steel |
| Motor Shaft | Stainless Steel |
| Upper Motor Bearing | Ball Bearing |
| Lower Motor Bearing | Ball Bearing |
| Cooling | Oil cooled |
| Motor Protection | Auto reset thermal overload protector |
| *For continuous operation | the water depth must be at least 1-1/2” to prevent the motor from overheating. |
| Pump Specifications | |
| Discharge Size | 1” NPT & 3/4” Garden hose thread |
| Cord Length | 25’ |
| Cord Type | SJTW, UL listed, 3-wire, 18 gauge |
| Pump Housing | Thermoplastic |
| Pump Base | Thermoplastic |
| Impeller Material | Thermoplastic |
| Impeller Type | Clog resistant |
| Gasket | Buna-N |
| Liquid Temp. Range | 32°- 120° F |
| Operation | Automatic |
| Fasteners | Stainless steel |
| Max Flow Rate | 35 Gallons per minute |
| Maximum Head | 25 feet |
| Max Pressure | 10.8 psi |
| Weight | 11.0 lb |
| Automatic Switch Specifications | |
| Type | Internal SJE Rhombus Vertical Master II |
| Switch on point | 1-1/2” |
| Switch off point | 1-1/4” |
| Material | High impact PVC |
